dictionary:xtension:initializecontroller
This is an old revision of the document!
Initialize Controller
resends any initial setup information to an interface device. For example for a CM11 the EEPROM memory will be erased. Can be used to clear up any problems that might get stuck in an interface. For other devices listed below the command does not erase any memory or do any factory resets, just sends a reboot command as listed:
interfaces that support this command:
- Vera (sends a reboot command, no settings changed or erased. Added in version 9.4)
- AD2USB (sends a reboot command, no settings changed or erased. Added in version 9.4)
- RadioThermostat (sends a reboot command, no settings changed or erased. Added in version 9.1)
- CM11a (clears device memory of any stored events or commands that might be stuck)
- CM15a (clears device memory of any stored events or commands that might be stuck)
- Lynx (resets device settings)
- ZTroller (resets any saved eeprom settings in the device)
Usage:
initialize controller (text, name of the interface)
dictionary/xtension/initializecontroller.1511712144.txt.gz · Last modified: 2023/02/13 14:51 (external edit)