User Tools

Site Tools


supported_hardware:lynx

Lynx

Lynx PLC The Lynx was available in several flavors, from the original DIY kit to a plugin module like the CM11a and also a model that included digital and analog I/O capability as well as relay control. Sadly these excellent interfaces are no longer being made, but if you have one, or can find one XTension fully supports both the X10 powerline signaling and digital and analog I/O and relay control. A lynx interface will require a usb serial adaptor as they are a serial device.

Lynx support is included in XTension and does not require any plugins or additional software licenses.

/home/e805485/machomeautomation.com/data/pages/supported_hardware/lynx.txt · Last modified: 2023/02/13 14:52 by 127.0.0.1