dictionary:housecode:allunitsoff
Table of Contents
All Units Off
Turn off all Units in a housecode.
This command can only be sent to an X10 controller. It has no effect on any other interface type.
Usage:
all Units off “X10 housecode A-P”
Optional Parameters:
interface (name of an X10 capable interface)
Examples:
all units off "A" interface "My CM11"
Notes:
If the interface parameter is left out you must have a Default Outgoing Powerline interface selected in the preferences or no command can be sent.
Some devices do not respond to this command.
/home/e805485/machomeautomation.com/data/pages/dictionary/housecode/allunitsoff.txt · Last modified: 2023/02/13 14:52 by 127.0.0.1