User Tools

Site Tools


kits:onewire

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
kits:onewire [2019/12/01 13:49] – [WiFi 1-Wire Host Kit] James Sentmankits:onewire [2023/02/13 14:52] (current) – external edit 127.0.0.1
Line 34: Line 34:
 This is not a battery operated project, it requires a stable DC power source. This is not a battery operated project, it requires a stable DC power source.
  
 +Some 5v power supplies that sag even a tiny amount may not be able to provide enough power to the device. I would recommend at least a 6v power supply though some 5v supplies do work.
 ====Connecting 1-Wire sensors:==== ====Connecting 1-Wire sensors:====
 Dallas 1-wire temperature sensors can be connected in either powered mode using the GND, 3.3v and 1-wire data pins, or in parasitic power mode using only 2 wires of 1-wire data and GND. All sensors connected must be either powered or in parasitic mode, the 2 cannot be mixed together. Dallas 1-wire temperature sensors can be connected in either powered mode using the GND, 3.3v and 1-wire data pins, or in parasitic power mode using only 2 wires of 1-wire data and GND. All sensors connected must be either powered or in parasitic mode, the 2 cannot be mixed together.
kits/onewire.1575208144.txt.gz · Last modified: 2023/02/13 14:51 (external edit)